Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 35)

Publication GMSI10-UM025C-EN-P - August 2010
Installing the XM-160/161/162 Direct Vibration Module 27
Figure 2.14 IEPE Accelerometer to Channel 1 Wiring
Figure 2.15 IEPE Accelerometer to Channel 2 Wiring
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 1
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
3
19
Channel 1 Input Signal
Signal Common
0
Channel 1 Input Signal
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 2
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
5
21
Channel 1 Input Signal
Signal Common
1
Channel 2 Input Signal