Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 36)

Publication GMSI10-UM025C-EN-P - August 2010
28 Installing the XM-160/161/162 Direct Vibration Module
Figure 2.16 IEPE Accelerometer to Channel 3 Wiring
Figure 2.17 IEPE Accelerometer to Channel 4 Wiring
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 3
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
7
23
Channel 1 Input Signal
Signal Common
2
Channel 3 Input Signal
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 4
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
9
25
Channel 1 Input Signal
Signal Common
41
Channel 4 Input Signal