Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 48)

Publication GMSI10-UM025C-EN-P - August 2010
40 Installing the XM-160/161/162 Direct Vibration Module
Figure 2.32 Velocity Sensor to Channel 1 Wiring
Figure 2.33 Velocity Sensor to Channel 2 Wiring
TYPICAL WIRING FOR COIL-BASED VELOCITY SENSOR
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 1
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
3
19
Channel 1 Input Signal
Signal Common
0
Channel 1 Input Signal
TYPICAL WIRING FOR COIL-BASED VELOCITY SENSOR
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 2
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
5
21
Channel 1 Input Signal
Signal Common
1
Channel 2 Input Signal