Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 37)

Publication GMSI10-UM025C-EN-P - August 2010
Installing the XM-160/161/162 Direct Vibration Module 29
Figure 2.18 IEPE Accelerometer to Channel 5 Wiring
Figure 2.19 IEPE Accelerometer to Channel 6 Wiring
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 5
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
11
27
Signal Common
42
Channel 5 Input Signal
TYPICAL WIRING FOR IEPE ACCELEROMETER
TO XM-160/161/162 DIRECT VIBRATION MODULE CHANNEL 6
Shield
Pin A - Signal
Pin B - Common
Cable shield not
connected at this end
13
29
Signal Common
15
Channel 6 Input Signal