Rockwell Automation SP120 AC Drive Demo Unit - Manual (Page 2)

©2000 Rockwell International Corporation
The information in this manual is subject to change without notice.
Throughout this manual, the following notes are used to alert you to
safety considerations:
Important: Identifies information that is critical for successful
application and understanding of the product.
!
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death,
property damage, or economic loss.
T rademarks not belonging to Rockwell Automation are property of their respective companies.
!
ATTENTION: Only qualified personnel familiar with the
construction and operation of this equipment and the
hazards involved should install, adjust, operate, and/or
service this equipment. Read and understand this
document in its entirety before proceeding. Failure to
observe this precaution could result in severe bodily
injury or loss of life.
ATTENTION: After disconnecting input power, wait two
minutes to insure that DC bus capacitors are
discharged. Failure to observe this precaution could
result in severe bodily injury or loss of life.
ATTENTION: The user is responsible for conforming
with all applicable local and national codes. Failure to
observe this precaution could result in severe bodily
injury or loss of life.
ATTENTION: Checking the direction of motor rotation
requires rotating parts and/or electrical circuits to be
exposed. Stay clear if the motor must be running.
Disconnect, lockout, and tag the power source if contact
must be made. Failure to observe this precaution could
result in severe bodily injury or loss of life.