3 programming basics, 1 parameter menu structure, Hapter – Rockwell Automation SP120 AC Drive Demo Unit User Manual
Page 9: Programming basics
![background image](/manuals/580987/9/background.png)
Programming Basics
3-1
C
HAPTER
3
Programming Basics
To program the drive for a specific application, you display
the appropriate parameter and adjust it as required. The
parameters are used to define characteristics of the drive.
3.1
Parameter Menu Structure
Note that the d and F group parameters are displayed in
sequence, but the A, b, and C parameters are grouped. You
must select the group before you can view the parameters
within that group.
Figure 3.1 – Parameter Menu Structure
Parameter
Entry
Saving entered
Parameters
d01
d01
d01
d01
d01
F04
C ..
A ..
F01
b ..
d16
A01
A98
b01
b92
C01
C91
P R O G
P R O G
P R O G
P R O G
Parameter
Group
Description
d
Display and Diagnostic Parameters (Read Only)
F
Basic Function Parameters
A
Advanced Function Parameters
b
Advanced Control and Protection Parameters
C
Intelligent I/O and Communication Parameters