Rockwell Automation FactoryTalk Historian SE 4.0 Live Data Interface User Guide - Manual (Page 39)

Rockwell Automation Publication HSELD-UM024A-EN-E–September 2013 39
Chapter 8
Startup Command File
In Windows, command file names have a .bat extension. The
Windows continuation character ( ^) allows for the use of multiple
lines for the startup command. The maximum length of each line is
1024 characters (1 kilobyte). The number of parameters is
unlimited, and the maximum length of each parameter is 1024
characters.
Command-line parameters should begin with a “ /” character. For
example, /ps=M.
The Interface Configuration Utility (ICU) provides a tool for
configuring the FTLD Interface startup command file.
The table below lists command-line parameters and their
descriptions.
IMPORTANT
We recommend that you always use the Interface Configuration Utility
to modify the startup file. If you manually change the startup file and
then open it using the Interface Configuration Utility, the utility will
rewrite all the startup parameters in the file.
Command-line Parameters