Using the administrative tools – Rockwell Automation FactoryTalk Historian SE 4.0 Live Data Interface User Guide User Manual
Page 50
Chapter 11 Starting and Stopping the Interface
50
Rockwell Automation Publication HSELD-UM024A-EN-E–September 2013
4. Wait, until the status on the status bar at the bottom of the
dialog box changes to
Running.
To stop the FTLD interface:
1. In the ICU, click
on the toolbar. The service status on the
status bar changes to
Stopped.
You may additionally check the status of the service in the
Administrative Tools (page 50) program of Control Panel.
To start the FTLD interface:
1. Click
Start > All Programs > Administrative Tools > Services.
The Services dialog box appears.
2. Right-click FTLD<X> (where
X is the interface number) and
select Start.
3. Wait until the status of the service changes to
Started.
To stop the FTLD interface:
1. In the Services dialog box, right-click FTLD<X> and select
Stop.
Using the Administrative
Tools