Rockwell Automation FactoryTalk Historian SE DataLink 4.2 User Guide - Manual (Page 133)

9
●
FactoryTalk Historian DataLink Function Reference
●
●
●
●
●
125
 If the outcode is 1, the following applies:
Mode Column 1 Column 2 Column 3
Total Total value
Minimum Time of min. Value Minimum value
Maximum Time of max. Value Maximum value
Stdev Stdev. Value
Range Time of min. Value Time of max. value Range value
Average Average value
Count Count value
Mean Mean value
 An output code of 2 transposes the output array that results from an
output code of 1, and results are returned in rows instead of in
columns.
 Outcode of 3 is not used.
 If the outcode is 4, the percent good is returned to the right of the
value cell.
 If the outcode is 5, the following applies:
Mode Column 1 Column 2 Column 3 Column 4
Total Total value Percent good
Minimum Time of min.
value
Minimum value Percent good
Maximum Time of max.
value
Maximum value Percent good
Stdev Stdev. value Percent good
Range Time of min.
value
Time of max.
value
Range value Percent good
Average Average value Percent good