The resulting function array appears as – Rockwell Automation FactoryTalk Historian SE DataLink 4.2 User Guide User Manual
Page 50
●
●
●
●
●
FactoryTalk Historian DataLink User Guide
42
Special Notes
You can use a
PI Expression
(page 91) instead of a tag name for this
function.
Reference a range of tag names to display sampled values for each.
Note that by default, values are displayed in rows for a column of
referenced tags, and in columns for a row of referenced tags.
For tags with step attributes, the value preceding a specified time
stamp is substituted for an interpolated value when the calculation
mode is
Interpolated
.
Example:
To see values corresponding to an array of time stamps for the
sinusoidu tag, the following arguments are set for the Timed Data
function:
Tagname = sinusoidu
Timestamps = <cell reference to existing array of compressed
data for sinusoid tag>
Retrieval Mode = interpolated
The resulting function array appears as: