Rockwell Automation TLY-Series Servo Motor - Manual (Page 16)

16 TL-Series Servo Motors
Publication TL-IN003A-EN-P — June 2007
NEMA Mount Dimensions, Approx. (cont.)
4 Tolerance for this dimension is: TLY -A1xx -0.021 mm (-0.0008 in.); TLY-A2xx -0.025 mm (-0.001 in.); TLY-A25xx -0.03 mm (-0.0012 in.).
5 TLY -A1xx has two threaded holes, TLY-A2xx and TLY-A25xx have four mounting holes.
Mounting holes are S diameter on M diameter bolt circle.
6 Tolerance for cable length is ±50.0 mm (±1.97 in.). Minimum bend radius is 15.00 mm (0.59 in.).
7 Tolerance for this dimension is: -0.38 mm (-0.015 in.).
8 Tolerance for this dimension is: +0.051 mm (+0.002 in.).
9 X-Y tolerance for this dimension is: TLY -0.051 mm (-0.002 in.). Length is untoleranced.
Motor
Series
TLY-A
N
4
mm
(in.)
NB
mm
(in.)
P
mm
(in.)
S
5
mm
(in.)
T
mm
(in.)
TB
mm
(in.)
CAB
6
mm
(in.)
G
7
mm
(in.)
F
8
mm
(in.)
Key
9
mm
(in.)
120
22.0
(0.8661)
—
42.0
(1.65)
8-32
Thread
2.0
(0.08)
—
1000
(39.4)
— — —
130
220
38.1
(1.50)
—
56.4
(2.22)
5.5
(0.217)
1.5
(0.06)
—
1000
(39.4)
10.92
(0.43) 3.175
(0.125)
(0.125 x 0.125
x 0.9375)
230
2530
73.02
(2.875)
—
86.0
(3.39)
5.5
(0.217)
1.6
(0.06)
—
1000
(39.4)
13.13
(0.517)
4.763
(0.1875)
(0.187 x 0.187
x 1.156)
2540
NEMA motor flanges and shafts are designed to inch dimensions. Other frame areas are designed to metric
dimensions. Conversions are mathematically calculated.