Rockwell Automation 20D PowerFlex 700H/S Frame 14 Replacement Power Structures - Manual (Page 10)

10 PowerFlex® 700S and 700H Frame 14 Replacement Power Structures
18. Remove the four screws that secure each of the Power Supply Voltage
Feedback board assemblies to the fan housing on the power structures
and carefully remove the Power Supply Voltage Feedback board
assemblies.
19. Disconnect the cable from connector J8 on each of the Power Supply
Voltage Feedback boards, and set the cable aside.
Remove screws
J2 J1
J4 J5
J8
Disconnect cable