Rockwell Automation 20D PowerFlex 700H/S Frame 14 Replacement Power Structures - Manual (Page 8)

8 PowerFlex® 700S and 700H Frame 14 Replacement Power Structures
14. Pull the rubber grommet, through which the ASIC board and Power
Supply Voltage Feedback board wire bundles are routed, out of the
drive frame and secure the wire bundles away from the frame of the
power structures.
15. Disconnect the fan control cables and, for drives with AC input,
disconnect the precharge cable from the Rectifying modules located to
the left of the ASIC board.
Rubber grommet and
wire bundles
Fan control cables -
Shown disconnected
Precharge cables -
Shown disconnected