Rockwell Automation T3837 ICS Regent MODBUS Master Package for WINTERPRET - Manual (Page 14)

MODBUS Master Package for W INTERPRET (T3837)
P D - 6048 August, 96
(Issue 1) 14
Figure 4. The Add Multiple MODBUS Variables Dialog Box
The variable parameters are as follows:
Name (Starting)
The name of the initial variable to be added. This is a required field and
must contain a valid W
INTERPRET tag name picture.
Node
The MODBUS node to be associated with each MODBUS variable. This
required field must contain a valid MODBUS node number in the range of 1
- 247.
Address (Starting)
The starting MODBUS address to be used. This required field must contain
a valid MODBUS address in the range of 0 - 49,999. The specified
address determines the MODBUS function to be used.