Rockwell Automation T3837 ICS Regent MODBUS Master Package for WINTERPRET - Manual (Page 20)

MODBUS Master Package for W INTERPRET (T3837)
P D - 6048 August, 96
(Issue 1) 20
Control Menu
The Control menu provides access to several commands common to all
function block monitors, including Run, Stop, and Scan. For descriptions of
these commands, refer to Commands Common to All Function Block
Monitors in Section 7 of the Regent
Ò + Plus User’s Guide.
The Control Menu command specific to the MODBUS Master Function
Block Monitor is the Take Monitor Offline command.
Take Monitor Offline
The Take Monitor Offline command allows you to toggle on and off the
constant update of the monitor with information from the Regent.
Search Menu
The Search menu allows you to perform standard search operations on the
MODBUS Master function block. This menu is implemented exactly as
Search menu in the MODBUS Master Function Block Editor section of this
document.
Monitor Variable Dialog Box
The MODBUS Variable Dialog Box (see Figure 10) is essentially the same
as that used in the editor, except that you cannot make any changes to the
variable definition, and the current value of each variable is displayed in a
separate field.
Figure 10. The MODBUS Master Monitor Parameter Dialog Box