Rockwell Automation Emonitor with a Gupta Single-User Database - Manual (Page 19)

2 • I NSTALLING E MONITOR
15
•
•
•
• •
1. Start Scheduler (Start > Programs > Rockwell Software > Emonitor > Utilities >
Scheduler) and click Add.
2. On the Profile dialog, enter the Profile Name, such as Storage Limit Updater or
Online Import Event. You can enter notes about the profile as well. Select Enable
profile for scheduling. Click Next to continue.
3. On the Response dialog, select Scheduled time/date/frequency.

For the Storage Limit Updater, click Next and then skip to step 7.

For the Online Import Event, select File change notification and click Settings.
4. Click Add File. Select the UD directory under your Emonitor program directory. In
the File name box, enter *.ulf. This tells Scheduler to look for unload files in the
unload directory. Click Open.
5. The unload files appear in the Monitored Files list. Click OK to continue.
6. Click Next on the Response dialog.
7. On the Events dialog, click Add Event.
8. Enter the Executable file and the Command line using the following guidelines, then
click OK. This example used the default Emonitor installation directory. If you
installed Emonitor in a different directory, use the path to your Emonitor program
directory.
For Online Import Event:
Executable file:
C:\Program Files\Rockwell Software\
Emonitor\didaemon.exe
Command line:
C:\Program Files\Rockwell Software\
Emonitor\odonline.edi