Rockwell Automation Emonitor with a Gupta Single-User Database - Manual (Page 25)

3 • U PGRADING FROM A PREVIOUS VERSION
21
•
•
•
• •
5. When finished, click Back to return to the main Autorun screen, and then click
RSLinx Classic to upgrade RSLinx ® Classic. If you want to use XM/DYN Online
Data to import data from XM modules, or Logix Online Data to import data from the
Logix family of controllers, RSLinx Classic version 3.60 or later must be installed on
the same computer. Follow the instructions on the screen to install or upgrade RSLinx
Classic. If you already have the latest version of the software, you can skip this step.
6. When finished, click Back to return to the main Autorun screen, and then click
SQLBase. Follow the instructions on the screen. If you already have the latest version
of the software, you can skip this step.
7. When finished, return to the main Autorun screen. Even if you are using the XML
Gateway with your Emonitor system, you do not need to click XML Gateway
Prerequisites. The correct versions of the software are included as part of Microsoft
Windows 7.
8. When finished, click Back to return to the main Autorun screen, and then click
Emonitor. Follow the instructions on the screen.
The XM/DYN Online Data and Logix Online Data software require the RSLinx Classic
software. It is recommended that you upgrade RSLinx before you upgrade Emonitor.
Do not remove your existing version of the SQLBase database software before installing the
new Gupta SQLBase 9.0.1 software. If you want to remove the SQLBase software, you can
uninstall it after you verify that the Emonitor upgrade completed properly.