Rockwell Automation T3834 ICS Regent Continuous Control Package for Winterpret - Manual (Page 14)

Continuous Control Package for W INTERPRET (T3834)
1 4
Industrial Control Services
The Alarms dialog is launched from the Controller dialog
by pressing the ‘Alarms...’ button. All alarms are optional -
if required, an alarm is specified by entering a variable
name. The same name may be used for alarms in different
controllers within a function block, but a warning message
will be displayed on compilation.
Figure 3. The Continuous Control (PID) Alarms
Dialog Box.
The PID alarms are as follows: