Rockwell Automation T3834 ICS Regent Continuous Control Package for Winterpret - Manual (Page 20)

Continuous Control Package for W INTERPRET (T3834)
2 0
Industrial Control Services
Control Menu
The Control Menu provides certain commands that are
common to all function block monitors. These include Run,
Stop and Scan commands to control the execution status of
the entire application program. For descriptions of these
commands see Commands Common to all Function Block
Monitors in Section 7, Loading, Monitoring and Testing
Application Programs in the Regent User’s Guide.
Control Menu commands which are Continuous Control
specific are: Tune Controller and Monitor Controller.
Tune Controller
The Tune Controller command displays the dialog box
shown in Figure 7. All parameters for the controller are
displayed. For parameters which have been defined as
constants, only the constant value is displayed. For
parameters which have been defined as variables, the
variable name is displayed in the right hand field and the
continuously updated value of the variable obtained from
the Regent is displayed in the left hand field. Due to the
size of the dialog, the full dialog cannot be seen on systems
with VGA resolution. The Windows ‘move window’ facility
can, however, be used to move the dialog around the screen
to view different sections.
Figure 7. Tune Controller Dialog Box.