Rockwell Automation T3834 ICS Regent Continuous Control Package for Winterpret - Manual (Page 8)

Continuous Control Package for W INTERPRET (T3834)
8
Industrial Control Services
File Menu
The File Menu gives you access to the standard function
block file commands which include: Save Function Block,
Revert to Last Saved, Compile, View Error Messages, Edit
Function Block Description, Edit Function Block Details,
Print Function Block, Print Setup, Log Off and Exit. For
more information on all of these commands refer to
Commands Common to all Function Blocks in Section 5 of
the Regent User’s Guide.
Edit Menu
From the Edit Menu the user can select the Add
Controller, Edit Controller, Insert Controller and Delete
Controller commands.
Add Controller/Insert Controller
The Add Controller command lets you add a controller to
the function block. The new controller is added at the end
of the list. The Insert Controller command lets you add a
new controller to the function block. The new controller is
inserted just above, or before, the selected controller.
After choosing Add or Insert Controller, the dialog box
shown in Figure 2 will open. The Controller dialog opens
with the default values shown.