Rockwell Automation LDL Ironless Linear Servo Motors - Manual (Page 42)

42 Publication LDL-UM001A-EN-P - March 2009
Chapter 6 Configure and Start Up the LDL-Series Linear Motor
Set Up the Connection to
Kinetix 6000 or Kinetix 2000
Drive This procedure configures the Kinetix 6000 or Kinetix 2000 drive for
your linear motor and encoder combination.
For help using RSLogix 5000 software as it applies to setting up your
linear motor, refer to
Additional Resources on page 7 . This procedure
assumes you are familiar with RSLogix 5000 software.
1. Click the Driver/Motor tab.
2. Click Change Catalog and select the appropriate Motor
Catalogue Number from the following list.
Cat. No.
LDL-N030120-DHTxx
LDL-N030240-DHTxx
LDL-N030240-EHTxx
LDL-T030120-DHTxx
LDL-T030240-DHTxx
LDL-T030240-EHTxx
LDL-N050120-DHTxx
LDL-N050240-DHTxx
LDL-N050240-EHTxx
LDL-N050360-DHTxx
LDL-N050360-EHTxx
LDL-N050480-DHTxx
LDL-N050480-EHTxx
LDL-T050120-DHTxx
LDL-T050240-DHTxx
LDL-T050240-EHTxx
LDL-T050360-DHTxx
LDL-T050360-EHTxx
LDL-T050480-DHTxx
LDL-T050480-EHTxx
LDL-N075480-DHTxx
LDL-N075480-EHTxx
LDL-T075480-DHTxx
LDL-T075480-EHTxx