Rockwell Automation GV3000/SE AC Drive AutoMax Network Communication Board, M/N 2AX3000 - Manual (Page 64)

Register Map Tables 5-1
C
HAPTER
5
Register Map Tables
This section presents the register map tables. Brief descriptions of parameters are
provided in the register map tables. For detailed parameter descriptions, refer to the
software manual. For parameter descriptions of network-specific parameters, see
section 3.3.
These map tables are for version 6.03 of the Regulator board. Earlier versions of the
board might have different parameter options.
5.1 Finding Data in the Register Map Tables
The register maps are listed in tables 5.2 through 5.9. The register maps describe the
registers and bits used by the GV3000/SE drive on the AutoMax network.
Table 5.1 – Location of Information in the Register Map Tables
Drop Data Type Table Page
1 Read Only 5.2 5-2
Read/Write 5.3 5-5
2 Read Only 5.4 5-8
Read/Write 5.5 5-10
3: Vector Read Only 5.6 5-12
Read/Write 5.7 5-13
3: V/Hz Read Only 5.8 5-15
Read/Write 5.9 5-16