Rockwell Automation FactoryTalk ViewPoint Quick Start Guide - Manual (Page 28)

F ACTORY T ALK V IEW P OINT Q UICK S TART
24
Creating a new Site Edition web application
After installing the FactoryTalk ViewPoint software, to create a new Site Edition web
application, connect to FactoryTalk ViewPoint Administration, and then perform
these tasks:
 Select a FactoryTalk View SE application.
 Select graphic displays from the FactoryTalk View SE application.
 Publish the displays to the FactoryTalk ViewPoint Server.
Connecting to FactoryTalk ViewPoint Administration
Open a web browser and then enter the address:
http://ComputerName/FTVP/Admin
where ComputerName is the name or IP address of the FactoryTalk ViewPoint Server
computer.
On the server computer, you can also click Start > All Programs > Rockwell
Software > FactoryTalk ViewPoint , and then click FactoryTalk ViewPoint
Administration .
If you receive a message to install Microsoft Silverlight 4, continue with the
following steps. Otherwise skip to “Creating a new Site Edition web application” on
page 26.
Only one web browser can connect to FactoryTalk ViewPoint Administration on a
given FactoryTalk ViewPoint Server.
FTViewPointQS.book Page 24 Thursday, July 17, 2014 8:55 AM