Rockwell Automation 20B PowerFlex 700 Dynamic Brake Kit - Manual (Page 5)

Rockwell Automation Publication PFLEX-IN030A-EN-P - July 2014 5
PowerFlex 700/700S Frame 5 Drives 600/690V Brake Bus Bar Insulator Installation
4. Secure the lower brake bus bar to the cable by using the existing hardware.
Tightening torque is 1.69 N•m (15 lb•in).
5. Slide the shrink wrap tube over cable and bus bar connection.
IMPORTANT The tube must overlap the existing bus bar insulation by a minimum of
0.5 inches so that the tube covers all exposed conductor surfaces.
4, 5