Rockwell Automation 20B PowerFlex 700 Dynamic Brake Kit - Manual (Page 6)

6 Rockwell Automation Publication PFLEX-IN030A-EN-P - July 2014
PowerFlex 700/700S Frame 5 Drives 600/690V Brake Bus Bar Insulator Installation
6. If necessary, to make reinstallation of the cable tie easier, remove the
hexalobular screw that secures the MOV to the chassis and remove the
MOV.
7. Secure the bus bars to the chassis by closing the cable tie. Note: It is
acceptable that the cable tie partially secures the shrink wrap tube in place.
6
7