Rockwell Automation T8017 Trusted Peer to Peer Communications - Manual (Page 19)

Trusted
TM
Communication Software Package T8017
Issue 10 Mar 08 PD-T8017 19
2.2.2. Digital Input Boards
Figure 8 shows the data rack display associated with an IEC1131 Toolset 16 channel digital input
board selected for incoming data to a Trusted
TM controller.
Figure 8 Peer to Peer Input Data Rack Display
The user must enter data as detailed below:
NETWORK_ID – The network that is carrying the data. Data will be received via all peer controllers
that share this network identity. Range 1 – 8.
SOURCE_PEER_ID – The peer that is sending the data. Range 1 – 40.
SOURCE_DATA_ID - Unique data block number defined at the output board. Range 1-64.
REFRESH_TMO - The maximum number of milliseconds allowed between successive refreshes of
input data before the data is declared invalid. Note that following this time the input data will either
retain the last received values or revert to a fail-safe condition according to the state of control rack
variable 1. Range 1-10000.
FS_VALUE - Control value adopted by inputs when input is status has failed. This value is always
adopted at application start-up, though it will not be used again while RACK 3:Variable 1 is set
TRUE. Range FALSE/TRUE.
Boolean variable inputs 1 to 16 – Boolean values received from the corresponding channel of the
selected output board in the sending system.
The 128 input peer board supports 128 Boolean inputs instead of 16 but is otherwise identical.