Rockwell Automation 1769-L30ER_L30ERM_L30ER-NSE_L33ERM_L33ER_L36ERM CompactLogix 5370 L3 Controllers Quick Start - Manual (Page 14)

14 Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
Preface
Required Software
Before attempting to complete any of the tasks described in this publication, verify that your
computer meets the following operating system and service pack compatibility requirements:
• Microsoft Windows 7 Professional (64-bit) with Service Pack 1
• Microsoft Windows 7 Home Premium (64-bit) with Service Pack 1
• Microsoft Windows 7 Home Premium (32-bit) with Service Pack 1
• Microsoft Windows Server 2008 R2 Standard Edition with Service Pack 1
If your computer does not meet the operating system and service pack compatibility
requirements, perform the necessary upgrades before continuing.
Table 2 lists the software used in this quick start. Specific software requirements are listed at the
beginning of each chapter.
Table 2 - Software Used in This Quick Start
Software Minimum Version Required
Studio 5000 21.00.00 Yes
Logix Designer application 21.00.00 Yes
RSLinx
®
Classic
3.51.00 Yes
ControlFLASH
™
12.00.00 - Automatically installed with Studio 5000
installation Yes
RSNetWorx for DeviceNet 21.00.00
No
(1)
(1) Installing RSNetworx for DeviceNet is only required if the automation system includes a DeviceNet network. We recommend that you install RSNetWorx for DeviceNet software to use with devices on a
DeviceNet network as described in publications listed in Table 1 . For more information, see Chapter 4, Configure the DeviceNet Network on page 53 .