Rockwell Automation 1769-L30ER_L30ERM_L30ER-NSE_L33ERM_L33ER_L36ERM CompactLogix 5370 L3 Controllers Quick Start - Manual (Page 69)

Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012 69
Create a Logix Designer Project Chapter 5
7. Expand the I/O Configuration
tree.
8. Right-click the controller and
choose Properties.
9. Use the tabs on the Controller
Properties dialog box to configure
the controller.
The IP address is set on the
Internet Protocol tab.
There are many configurable parameters located on various tabs in the Controller
Properties dialog box. For more information on configuring your CompactLogix 5370 L3
controller, see the CompactLogix 5370 Controllers User Manual, publication
1769-UM021 .
10. Click OK.
11. Go offline.
IMPORTANT Make sure you set an IP
address and subnet Mask
that matches the values set
in
Assign an IP Address to
the Controller Over a USB
Connection on page 51
.