Rockwell Automation 1769-L30ER_L30ERM_L30ER-NSE_L33ERM_L33ER_L36ERM CompactLogix 5370 L3 Controllers Quick Start - Manual (Page 72)

72 Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
Chapter 5 Create a Logix Designer Project
3. Select the 1769-SDN scanner
module and click Create.
The Select Major Revision dialog
box appears.
4. Select the Major Revision for your
module and click OK.
5. When the New Module dialog box
appears, configure the following
parameters:
• Name
• Slot
• Electronic Keying
6. Check the Open Module
Properties checkbox and click OK.
Additional tabs with configurable parameters appear.