Rockwell Automation Liqui-Flo Trane Addendum User Manual
Page 23
Cabinet Mounting, Wire Routing, and Liquid-Cooling Connections
3-7
Step 3. Use a wrench to further tighten the connectors 1.5 to 2.5 turns. Do not hold
the bulkhead fitting with a pipe wrench when tightening the connectors as the
fitting may be damaged. Note that the bulkhead fitting has a built-in
anti-rotation feature and will not turn as the connector is screwed in.
Step 4. Visually inspect the connections for leaks.
Figure 3.5 – Liquid Cooling Bulkhead Fittings
!
ATTENTION: The cabinet’s bulkhead fittings may be damaged if they are
held with a pipewrench. Do not hold the bulkhead fitting with a pipe
wrench when tightening the connectors. The bulkhead fitting has a built-in
anti-rotation feature and will not turn as the connector is screwed in.
Failure to observe this precaution could result in damage to, or
destruction of, the equipment
Rear View
Coolant Input
Fitting
Fitting
Coolant Output