AJA Ki Pro - Manual (Page 49)

Ki Pro v3.2 www.aja.com 49
15.4 DROPPED FRAMES This parameter determines how playback handles dropped frames. These are the
options:
16.1 FORMAT MEDIA This parameter is used to format the currently selected storage device. These are the
options:
16.2 DELETE CLIPS This parameter can be used to delete all of the clips on the media. These are the options:
The Ki Pro Storage Module can be used to hold data other than Apple ProRes 422
QuickTime recordings. If other files are saved to the Ki Pro Storage Module, they should
be placed outside of the "AJA" folder. Any material inside of the "AJA" folder will be erased
if a MEDIA>Delete Clips>DELETE ALL is performed.
17.0 REEL NAME This parameter sets the reel name associated with all clips generated while using this
setting. These are the options:
The reel name is a number between 001 and 999. It is historically linked to the naming
conventions used for film and tape-based media. The REEL NAME is an incrementing
three digit value that works with EDLs. For this reason, the parameter does not have a
“NONE” selection—all clips will be associated with a REEL NAME. The REEL NAME
parameter is also the name of the media as it will appear when the storage device
(storage module or ExpressCard/34) is mounted on a Mac OSX desktop (and media was
formatted by the user).
NOTE: The REEL NAME cannot be changed once a recording session starts on the storage unit
without reformatting the drive.
17.2 CLIP NAME This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either “Clip” or “SC”:
CONTINUE
STOP In the unlikely event that the playback of a clip(s) begins to
drop frames, this parameter allows users to define whether
the playback continues or stops.
KEEP MEDIA (default)
FORMAT MEDIA No action (do not format the media device selected)
Format the selected media device (you will be prompted Y/N?).
If no media is inserted in the Ki Pro, the message “No
Storage” is displayed.
KEEP CLIPS (default)
DELETE ALL No action (do not delete clips)
Delete all clips on the storage device when DELETE CLIPS is
pressed or Adjust up arrow is pressed and held for 2 seconds.
If no media is inserted in the Ki Pro, the message “No
Storage” is displayed.
001 to 999
(default = 001) Press ADJUST button up or down to change the REEL NAME
value from 001 to 999.
SC (default)
Clip Clips generated will have filenames beginning with “SC”
Clips generated will have filenames beginning with “Clip”