AJA Ki Pro - Manual (Page 78)

Ki Pro v3.2 www.aja.com 78
Figure 23. Ki Pro Web Interface, Media Screen
Media State (12.1): This parameter defines whether the media is used for video/audio recording or data
transfer using an Ethernet LAN or Firewire 800 (FW).
Encode Type (14.1): This parameter defines the Apple ProRes encoding method.
Play Media (15.1): This parameter determines behavior during playback: either one clip will play when
“Play” is selected, or all clips on the media (All) or in the playlist (Playlist) will be played.
See parameter 15.1, Play Media, in Chapter 3 for details.
Loop Play (15.2): This parameter turns looped playback on and off.
Play List (15.3): This parameter specifies the playlist to be played.
Dropped Frames (15.4): This parameter determines how playback handles dropped frames.
Format Media (16.1): This parameter is used to format the currently selected storage device.
Reel Name (17.0): The reel name is a number between 1 and 999. It determines the reel name associated
with all clips generated using this setting. It is also the name of the media as it will appear
when the storage device (storage module or ExpressCard/34) is mounted on a Mac OSX
desktop. To enter a specific value, click on the number to highlight it, type in a value, and
press Enter to confirm the new value. You may also click and drag on the slider to make
adjustments. To increment by single values using the slider, click the slider to highlight it,
and then press the "back" arrow or "forward" arrow on your keyboard.
NOTE: the Reel Name cannot be changed once a recording session starts on the storage unit without
reformatting the drive.
Clip Name (17.2): This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either “Clip” or “SC”.
Clip Number (17.3): This parameter determines the clip number, from 1 to 999, that follows the CLIP NAME,
and is associated with all clips generated while using this setting. To enter a specific
value, click on the number to highlight it, type in a value, and press Enter to confirm the
value. You may also click and drag on the slider to make adjustments. To increment by
single values using the slider, click the slider to highlight it, and press the "back" arrow or
"forward" arrow on your keyboard.