AJA Ki Pro - Manual (Page 39)

Ki Pro v3.2 www.aja.com 39
• Select a wireless network to connect to (as set on the access point you’ll communicate
with).
• Select the type of security, if any, to be used. If there is security, you’ll also enter its
password.
• Once configured, you can control Ki Pro from an iPhone or other 802.11 wireless device
that supports browser control (iPod Touch et al).
Wireless control of Ki Pro is managed using menus 53.1 through 53.5 as listed in Chapter
3, under Config Menu Parameters. The steps of setting up and using Wireless control are
then discussed later in Chapter 4 under Browser Remote Control.