AJA Ki Pro - Manual (Page 84)

Ki Pro v3.2 www.aja.com 84
Figure 28. Ki Pro Web Interface, Network Screen
IP Address Type (50.1): Use to set the type of IP address for Ki Pro. You can select a Static address that you enter
in the IP Address field, you can select DHCP for automatic IP address assignment by your
network router, or you can select Default to set Ki Pro to its default IP address, which is
0.65.74.65.
IP Address (50.2): Enter an IP address compatible with your LAN (if you have one). When networking Ki Pro
to a computer, this is the IP address that you’ll enter in the computer’s web browser to
bring up the Ki Pro’s web interface from its embedded web server. You must also click the
“Update” button to update Ki Pro with the IP address entered here. When an IP address is
entered and the Update button is clicked, the IP address will change and the browser will
display a “redirecting to...” page which should send the browser to the new IP address
entered. (You can also click on a link on the redirect page.)
Netmask (50.3): Enter a subnet mask compatible with your LAN (if you have one). You must also click the
“Update IP Address” button to update Ki Pro with the changed information entered here.
Default Gateway (50.4): Enter the IP address for your LAN’s gateway/router (if you have one). You must also click
the “Update IP Address” button to update Ki Pro with the changed information entered
here.
Apply: Pressing this button requests Ki Pro to update its IP information with that entered on this
screen.
Available Ki Pros: The Network panel on the right side of the screen lists the Ki Pro devices present on the
same local LAN as the current Ki Pro (see note below). The serial numbers of all Ki Pros on
the LAN, or their defined “System Names” (see parameter 50.5) are listed—and clicking
on any of these will bring up the Status screen of that Ki Pro. Note: the Ki Pro you control
may be running a different software version so screens may look different. As a rule, it’s
Network Pane:
Click arrow icon to expand list
Click gear icon to open Network Menu Link:
Click to open Network Configuration Screen: