AJA Ki Pro User Manual
Page 29
Advertising
Ki Pro v3.2
www.aja.com
29
Figure 11. Exo-skeleton Option
For most uses with an Exo-skeleton, you’ll want to first mount the camera or camcorder
to the adjustable mount on top, before sliding in the Ki Pro unit and locking it. To mount
a camera, follow these steps:
1. Locate the camera mount locking knob on the Exo-skeleton and loosen it.
2. Slide the camera mount off of the mounting rail.
3. Place the camera on the mount, orienting the mount’s alignment pin to camera’s
corresponding pin socket. Once aligned, tighten the mounting screw to secure the
camera.
Slide the camera and mount back on the rail and tighten the locking knob.
Base Ki Pro Exo-skeleton
chassis with camera mount
Knurled thumbscrews
secure Ki Pro chassis
to Exo-skeleton
Advertising