AJA Ki Pro - Manual (Page 71)

Ki Pro v3.2 www.aja.com 71
54.3 802.11 DHCP
MASK
This parameter determines the subnet mask used by Ki Pro’s wireless 802.11 transceiver.
55.4 DATE SET This parameter manually sets the calendar date of the internal Ki Pro clock. The value is
defined as YYYY/MM/DD (year/month/day).
55.6 TIME SET This parameter manually sets the time of the internal Ki Pro clock, when setting manually
(NTP not used).
70.1 SCREEN SAVER When set to “AJA Logo”, a rolling AJA logo screen saver will appear on the alphanumeric
display after 3 minutes of inactivity—defined as no button presses on the front panel.
When the Screen saver is on, the STATUS button or STOP button will exit the screen saver.
NOTE: The screen saver will not appear if an active transport function is underway (e.g., Play, Record,
etc.).
variable Using the adjust buttons, enter a subnet mask compatible
with your access oint (if you have one). This is only needed
for Static IP configurations.
If 54.1 is set to DHCP, the default Subnet Mask is: 255.255.255.0
variable Using the adjust buttons, enter a calendar date for Ki Pro.
Using the adjust buttons and the top SELECT button, select
the characters for each category (YYYY/MM/DD). The
adjust buttons scroll through the choices and the top
SELECT button advances to the next character. While
selecting characters, the character being changed will flash
to show its position. When finished, the final press of the
SELECT up button will flash the whole value, hit SELECT
once more to confirm and the next menu parameter will
appear.
variable Using the adjust buttons, enter a time for Ki Pro’s clock. Using
the adjust buttons and the top Select button, select the
characters for each digit (hours/minutes). The adjust
buttons scroll through the choices and the top Select
button advances to the next character. While selecting
characters, the character being changed will flash to show
its position. When finished, the final press of the SELECT up
button will flash the whole value, hit SELECT once more to
confirm and the next menu parameter will appear. Time is
set using a 24 hour format (military) and must be set to
GMT time.
NOTE: There are many websites that will assist you in
converting your local regional time to GMT (UTC). AJA does
not endorse any particular one, but here are two examples:
http://tycho.usno.navy.mil/zones.html
http://hurricanes.noaa.gov/zulu-utc.html
ON (AJA LOGO) (default)
OFF
SYSTEM NAME
Display horizontally rolling AJA logo after 3 minutes of
button inactivity
Screen saver is disabled.
Display the Ki Pro system name set in parameter 50.5.