Baumfolder BAUM20: Ifold Service Manual User Manual
Page 9
Advertising
Figure 7
A-F1
4L1
A-F2
4L2
Fuse Block
Ground Lug
14.
Take wire and cut into two equal lengths. Strip approximately 5/16” of wire insulation from each conductor at both ends. Label one conductor 4L1 and the other conductor 4L2 at both ends. Wire 4L1 to the top of fuse block
A-F1, and wire 4L2 to the top of fuse block A-F2, as shown in Figure 7.
7
Page 7 of 45
TP10497
Advertising