Metrohm 870 KF Titrino plus Manual - Manual (Page 46)

5.10 Manual control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
4 Start dosing
￭ Press [START].
The status changes to busy, the dosed volume is displayed. When
the volume of one cylinder has been dosed, the dosing cylinder will
be refilled automatically.
5 Fill the cylinder
￭ Press [STOP] or [BACK].
The dosing cylinder is filled. If you start the filling with [BACK], then
the dialog will also be exited.
Dosing a particular volume (ADD)
You can dose a particular volume with the ADD function.
Proceed as follows:
1 Open the manual control
￭ In the main dialog, select Menu and press [OK].
The main menu opens.
￭ Select the menu item Manual control and press [OK].
Manual control opens.
2 Select the dosing function
￭ Select the Dosing item.
￭ In the function bar, select ADD and press [OK].