Metrohm 870 KF Titrino plus Manual - Manual (Page 47)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 37
3 Configure the dosing function
NOTE
￭ The dosing and filling rates should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 10.1.1, page 70).
￭ Enter the desired volume.
￭ Enter the dosing rate.
￭ Enter the filling rate.
4 Start dosing
￭ Press [START].
The status changes to busy, the dosed volume is displayed. When
the volume of one cylinder has been dosed, the dosing cylinder will
be refilled automatically.
5 Fill the cylinder
￭ Press [STOP] or [BACK].
The dosing cylinder is filled. If you start the filling with [BACK], then
the dialog will also be exited.
5.10.2 Stirring
You can control a connected stirrer manually.
Proceed as follows:
1 Opening the manual control
￭ In the main dialog, select Menu and press [OK].
The main menu opens.
￭ Select the menu item Manual control and press [OK].
Manual control opens.