Metrohm 870 KF Titrino plus Manual - Manual (Page 86)

10.6 Remote interface
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
76 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
10.6 Remote interface
10.6.1 Pin assignment of the remote interface
1
5
6
9
5
1
9
6
Figure 16 Pin assignment of remote socket and remote plug
The above figure of the pin assignment applies for all Metrohm instru-
ments with 9-pin D-Sub remote connector.
Table 7 Inputs and outputs of the remote interface
Pin No. Assignment Function
1 Output 0 Ready/EOD
2 Output 1 -
3 Output 2 Titration
4 Output 3 Cond OK
5 Output 4 Error
6 0 volt (GND)
7 +5 volts
8 Input 0 Start
9 Input 1 Stop
Inputs
+5 V approx. 5 k Ω Pull-up
tp
t
p
> 100 ms
active = low, inactive = high