Metrohm 870 KF Titrino plus Manual - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 System settings
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 45
NOTE
Only one backup can be created on the same USB flash drive.
If a backup is already stored on the flash drive, then this will be over-
written as soon as the function is performed once again.
Restore
Load the backup from a connected USB flash drive.
Directory structure on the USB flash drive
A directory with the instrument number will be created on the USB flash
drive. The structure within this directory appears as follows:
Figure 14 Directory structure on the USB flash drive
Backup All of the files of the backup are stored in this
directory. The directory is created as soon as a
backup is created for the first time.
Files Exported methods are stored in this directory.
The directory is created as soon as a backup is
exported for the first time.
Only methods located in this directory can be
imported.
pc_lims_report PC/LIMS reports are stored in this directory as
TXT files. The directory is created as soon as a
PC/LIMS report is printed for the first time.