Metrohm 930 Compact IC Flex Oven/SeS/Deg User Manual

Page 30

Advertising
background image

3.6 Connecting the eluent bottle

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

22

￭￭￭￭￭￭￭￭

930 Compact IC Flex Oven/SeS/Deg (2.930.2460)

4 Mounting the adsorber tube

NOTE

Depending on the eluent used, the adsorber tube (6.1609.000)
must be filled differently:

￭

For alkaline eluents or eluents with a low buffer capacity: first a
little cotton, then CO

2

adsorber material.

￭

For all other eluents: only cotton.

￭

Remove the plastic cover from the large opening of the adsorber
tube. Fill the adsorber tube and close it again using the plastic
cover.

￭

Insert the adsorber tube into the bottle cap's large opening. Fas-
ten it to the bottle cap using the SGJ clip (6.2023.020).

Advertising
See also other documents in the category Metrohm Equipment: