Metrohm 714 IC Metrodata User Manual

Page 33

Advertising
background image

3.3 Use of existing methods

IC Metrodata for Win95

27

•

Select the

Level

and click on the

OK

button.

•

Click the

OK

button in the

Concentrations

window.

Display calibration curves

•

Click the

Graphs>>

button in the

Components

window.

•

Select the desired component in the

Component

field for which the

calibration curve should be displayed.

•

Close the

Component

window by clicking

OK

.

•

Close the

Components

window below the chromatogram by clicking

OK

.

Save chromatogram and method

•

Close the chromatogram window. A window appears with the mes-

sage

Changes in *.chw. Modified: Calibration, Integration, Peaks, Re-

port. Save changes?

•

Click the

Yes

button. A window appears with the message

*.chw al-

ready exists. Overwrite?

•

Click the

Yes

button. A window appears with the message

Method

*.mtw

was modified. Save changes?

•

Click the

Yes

button. The

File Save As

window appears.

•

Since the initially loaded method (e.g.

dual1sup.mtw

) is not write-

protected, the modified method should be saved with a new name.

Therefore enter a new name in the

Filename

field and click

OK

.

Recording of a sample chromatogram

•

Click on

or select

Load method and run

from the

Acquire

menu.

•

Select the previously saved method

*.mtw

in the

File Open

window

and click

OK

.

•

Enter a sample name (max. 14 characters, e.g. "drinking water") as

Ident

in the

Start Run

window.

•

If required, enter more parameters (e.g.

Dilution

) to characterize

sample and acquirement conditions.

•

Click the

OK

button.

The window for the on-line display of the chromatogram opens.

The status display below shows the message

Waiting

.

•

Set the injection valve at the 733 IC Separation Center to "FILL"

(manually or by program) and fill the sample loop with sample.

Advertising