Metrohm 714 IC Metrodata User Manual

Page 57

Advertising
background image

3.8 Method associated remote control

IC Metrodata for Win95

51

Start inject programm and data acquisition

•

Select

Equipment

of the

Method

menu.

•

Click on

732 IC Detector[ COM# ]

in the

Start with method

field. After-

wards, click the Ð button to move this entry into the lower

Start with

inject

field.

•

Click on

or select

Restart method

of the

Acquire

menu.

•

Update the parameters in the

Start Run

window. Open the

Measure

tab and select the

Extern

option for

Start mode

. Start the method

with

OK

.

•

The parameters stored in the method and the time program are

sent to the 732 IC Detector.

*

in the lower left part of the window

shows that the PC is sending data.

•

As soon as the program at the 732 IC Detector is ready, the LED in

the <PROG R/S> key at the 732 IC Detector lights up. The pro-

gram is now waiting for an

Inject

at the valve A of the 733 IC Sepa-

ration Center.

•

If the

Restart Method

option is selected in the

Method / Method Setup /

Processing

menu, the time program is restarted at the end of the

program. If the

Restart Method

option is not selected in the

Method /

Method Setup / Processing

menu, the program is performed only

once. If the method is started from a queue, the program is

stopped as soon as all rows of method X are worked off.

•

A time program of the

Inject

type is also stored as program type

cycle

with

number of cycles = 1

. The time program and the parame-

ters are sent again to the 732 IC Detector at the end of the chroma-

Advertising