Metrohm 753 Suppressor Module - Manual (Page 34)

4.2 Maintenance and servicing
753 Suppressor Module / 8.753.1003 Instructions for Use
31
38 38 37 37 36 36 35 35
Fig. 9: Assembling the suppressor
35 35 Screw nut 37 37 Suppressor rotor (6.2832.000)
36 36 Connection piece
(6.2832.010)
with input and output leads
38 38 Suppressor holder
6 Clean connection piece
• Clean the sealing surface of connection piece 36 36 with the aid
of a lint-free cloth and ethanol.
7 Insert connection piece
• Insert connection piece 36 36 in suppressor holder 38 38 in such a
way that connection "1" is at the top and that the three lugs on
the connection piece fit in the corresponding openings of the
holder.
• Screw nut 35 35 onto the thread of suppressor holder 38 38 manu-
ally (do not use tools).
8 Connect and condition the suppressor
• Reconnect the suppressor to the IC system (see section 2.3.2
and section 2.4.2).
• Before switching the suppressor to the next position for the
first time rinse all 3 suppressor units with solution for 5 min.