E-flite Mini Ultra Stick ARF - Manual (Page 11)

Firewall Installation
Required Parts
• Outrunner firewall or Stick Mount firewall
• 4-40 blind nut (4)
Required Tools and Adhesives
• 6-minute epoxy
or
• Thick CA
 1. The Mini Ultra Stick does not include a gearbox
or propeller. However, we do include two
different firewalls for attaching to the nose of the
plane. You need to first determine what power
system you will be using, an inrunner with a
gearbox, or an outrunner. We even include a
firewall stick mount, which attaches to the Stick
Mount firewall. The Outrunner firewall can
accommodate small and larger outrunners, with
options for mounting your outrunner on the
outside of the aircraft with your aluminum mount
or inside of the nose directly to the firewall.
Choose the firewall that fits best with the motor you have
selected to use. Install the 4-40 blind nuts to the firewall as
shown. This will be the back-side of the firewall.
Note: White UltraCote® is on the front side
(outside) of the firewall and the blind nuts
should be inserted on the inside of the firewall.
11