Outrunner motor installation – E-flite Mini Ultra Stick ARF User Manual
Page 13
Outrunner Motor Installation
Required Parts
• Fuselage
• Brushless motor
• Brushless speed control
• 4-40 x 1/4" socket head screw (4)
• Prop adapter
• Propeller
Required Tools and Adhesives
• Hex wrench: 3/32"
Skip to page 16 for setup of an inrunner motor
with gearbox.
Note: This section covers the installation of a
brushless outrunner motor with attachment to
the outside. You do have the option of installing
your outrunner inside the fuselage as well. If
using our recommended E-flite™ Outrunner, it
may be necessary to reverse the direction of
your shaft to install the motor inside the fuse.
See photo below for reference.
Option 1: Motor Installation Inside Fuselage
1. Install the outrunner motor using the hardware
provided with the motor. The screws go through
the front of the firewall and into the motor.
13