E-flite Mini Ultra Stick ARF - Manual (Page 24)

 5. Plug the aileron servo into the receiver and
turn on the radio. Center the aileron servo
electronically. Pass the wire through the micro
control connector. Install the servo horn parallel
to the aileron hinge line. Center the aileron, then
secure the wire using the 2mm x 4mm screw.
 6. Repeat Steps 2 through 5 for the remaining
aileron linkage installation.
 4. Attach the 5" pushrod wire to the control horn
using the pre-formed “Z” bend in the wire.
24