E-flite Mini Ultra Stick ARF - Manual (Page 14)

Option 2: Motor Installation Outside Fuselage
 1. It may be necessary to attach motor mount
or other accessories to your particular motor
at this time.
 2. Attach the Outrunner motor to the front of
the firewall using four 4-40 x 1/4" socket
head screws.
Note: The mount is attached to the front (white
side) of the firewall.
Important Information About Your Brushless ESC
Make sure your ESC brake is programmed
to Off. Also, be sure to use an ESC with the
proper 9V cutoff when using 3-cell Li-Po packs,
or 6V cutoff when using 2-cell Li-Po packs.
14