E-flite Mini Ultra Stick ARF - Manual (Page 26)

Radio Installation
Required Parts
• Fuselage
• Receiver
• Servo w/hardware (2)
• Micro control connector (2)
• Control connector backplate (2)
• 2mm x 4mm screw (2)
• Hook and loop material
• Micro pushrod keeper (2)
Required Tools and Adhesives
• Screwdriver, #0 Phillips
• Drill
• Drill bit: 3/64"
 1. Install the rudder and elevator servos into
the fuselage using the hardware provided
with the servos.
26